Maintenance and oil replacement of used Komatsu excavators in canada

January 20,2024

As a leader in construction machinery and equipment, used Komatsu excavators are deeply loved by users for their efficient working capabilities and long-lasting durability. But if you want this equipment to continue to perform at its best, regular maintenance is essential.

Today, we will introduce in detail how to change the engine oil.

First of all, choosing the right engine oil is crucial to the normal operation of your excavator.

Be sure to use the correct engine oil grade and viscosity as recommended by the vehicle manufacturer. At the same time, make sure that the genuine engine oil you purchase has excellent lubrication properties and cleaning capabilities.

used Komatsu excavators

Before you start changing the oil, make sure the excavator is parked in a safe, flat location.

Turn off the engine and wait a few minutes for the oil to drain completely back into the oil pan. Then, unscrew the drain bolt of the oil pan and drain the waste oil completely. During this process, care should be taken to avoid splashing of waste oil to avoid pollution to the environment.

Next, remove the old oil filter using a suitable tool. Before installing a new oil filter

Make sure its sealing ring is coated with an appropriate amount of fresh engine oil to enhance sealing performance. Then, install the new oil filter onto the engine, making sure it's installed securely.

When filling new engine oil, make sure the amount of oil is appropriate, neither too much nor too little. Generally, just pour the appropriate amount of new engine oil into the oil pan as recommended by the manufacturer. After filling, start the engine and let it run for a few minutes so that the new oil can flow evenly through the entire lubrication system.

used Komatsu excavators

After completing these steps, check the fluid level again to make sure the oil level is within the normal range. At the same time, check for oil leakage around the engine and under the car. Once leakage or uneven oil stains are found, stop the vehicle immediately to check and solve the problem.

Finally, clean the work area and check the exhaust system for oil leaks.

If everything is fine, congratulations on completing the oil change!

Through the above steps, you have successfully changed the oil of your used Komatsu excavator. Remember, regular maintenance is key to maintaining good excavator performance. Only by continuing to pay attention to and take good care of your equipment can it create more value for you.

Please leave

Hot categories

IT Support By Asia Juexiang Construction Machinery

Copyright © 2023 Asia Juexiang Construction Machinery by injnet - Privacy policy | Terms and Conditions